Downloads

 

Keep Factory-Floor Controls On-Line With Up To 5600 BTUH Of Cabinet Cooling

Dirt, moisture, hazardous or corrosive materials-a bad environment is the Achilles’ heel of industrial electronic systems. And it’s a real hazard when you have to open the cabinet door to prevent heat build-up.

 

Compressed-Air-Operated Stainless Cabinet Control Coolers For Hazardous Environments

Using a low-cost, reliable Vortex Tube, compressed-air operated AiRTX Polar™ Cabinet Coolers purge and cool electrical/electronic enclosures with filtered air that’s 45° F colder than your compressed air supply. A built-in relief valve lets hot air escape from the cabinet enclosure, while the cooler supplies clean, cold air.

They mount-in minutes-in a standard electrical knockout to maintain your NEMA 4, 4x, or 12 rating. A built-in, heavy duty muffler makes the Cabinet Cooler extremely quiet for use in production areas.

Use Them Anywhere!

If you’re an OEM, you’ll find the fit and finish of our Cabinet Coolers a complement to your own equipment.

Thermostatic systems are highly recommended as they produce a truly maintenance free cooling system. No forgetting to turn it on or off, increasing or decreasing air supply on hot days, consuming compressed air when cooling is not necessary, and no thermal hot and cold changes. A constant 90°F (32°C) to provide the electronics with a long life. For double wide cabinets up to 10’W x 6’H x 2’D or cabinets in extreme hot conditions above 150°F, order Model 70370.

 

Model 75008, 15, 25, 35 (Aluminum)

 

Model 70008 (Stainless Steel)

Model 70015, 25, 35 (Stainless Steel)

 

Model 70008X (Stainless Steel)

 

Model 70015X, 25X, 35X (Stainless Steel)

 

NEMA Type 4,12NEMA Type 12,4xNEMA Type 4,12
AluminumStainless SteelStainless SteelDescription
7500870008x70008600 BTU/H Cooler and ducting kit, muffler
7510870108x70108600 BTU/H Cooler and ducting kit, muffler and 5 micro auto drain filter
7530870308x70308600 BTU/H thermostatic system includes: Cooler, auto drain filter, ducting kit, muffler, thermostat, solenoid valve
7510570105x701051100 BTU/H Cooler and ducting kit, muffler
7511570115x701151100 BTU/H Cooler and ducting kit, muffler and 5 micro auto drain filter
7531570315x703151100 BTU/H thermostatic system includes: Cooler, auto drain filter, ducting kit, muffler, thermostat, solenoid valve
7502570025x700251800 BTU/H Cooler and ducting kit, muffler
7512570125x701251800 BTU/H Cooler and ducting kit, muffler and 5 micro auto drain filter
7532570325x703251800 BTU/H thermostatic system includes: Cooler, auto drain filter, ducting kit, muffler, thermostat, solenoid valve
7503570035x700352800 BTU/H Cooler and ducting kit, muffler
7513570135x701352800 BTU/H Cooler and ducting kit, muffler and 5 micro auto drain filter
7533570335x703352800 BTU/H thermostatic system includes: Cooler, auto drain filter, ducting kit, muffler, thermostat, solenoid valve
7537070370x703705600 BTU/H thermostatic system includes: 2 Coolers (model 70035), auto drain filter, ducting kit, muffler, thermostat, solenoid valve

 

Installation Of Thermostatic Cabinet Control Cooler System

Double Wide System Components Model 70370:
2 of Model70035Cooler with Conducting Kit
1 of Model90302Solenoid
1 of Model90300Adjustable Thermostat
1 of Model90176Auto Drain Filter

 

NEMA
TYPE 4,12		NEMA
TYPE 4,12		NEMA
TYPE 12,4x		Inlet
Pressure		Air
Consumption		Capacity
psi(BAR)(CFM)(LPM)(BTU/N)(Kcal/H)
AluminumSSSS
750087000870008x10078225600150
750157001570015x1007154251100280
750257002570025x1007257001800450
700357003570035x1007359902800700
753707037070370x10077019805600